PERMATEX INDUSTRIAL CORPORATION
07/02/97
ROCKY HILL,
CONNECTICUT 06067
TELEPHONE:
(860) 571-5100
MATERIAL SAFETY
DATA SHEET Page 01 of 05
Locks Studs(TM) High Strength Threadlocker
82174
1.
CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: Locks
Studs(TM) High Strength Threadlocker
Item No.: 82174
Product Type: Anaerobic
2.
COMPOSITION, INFORMATION ON INGREDIENTS
Ingredients CAS
No. %
Polyglycol dimethacrylate
25852-47-5 65-70
Bisphenol A fumarate resin
39382-25-7 20-25
CUMENE HYDROPEROXIDE* 80-15-9 1-3
Poly(ethylene)
9002-88-4 1-3
SACCHARIN
81-07-2 1-3
N,N-Dialkyltoluidines
613-48-9 0.1-1
SILICA, AMORPHOUS, FUMED,
CRYSTALLINE-FREE 112945-52-5 0.1-1
* This component is listed as a SARA Section 313 Toxic Chemical.
Ingredients which have exposure limits
Exposure Limits (TWA)
ACGIH OSHA OTHER
Ingredients
(TLV) (PEL)
SILICA, AMORPHOUS, FUMED,
CRYSTALLINE-FREE 10 mg/m3 TWA 6 mg/m3 TWA 3 mg/m3 TWA
resp. dust
Exposure Limits (STEL)
ACGIH OSHA
Ingredients (TLV) (PEL)
3.
HAZARDS IDENTIFICATION
Toxicity: Mild eye
irritant.
Oral LD50 more
than 10,000 mg/kg.
Dermal LD50
more than 5000 mg/kg.
Primary Routes of Entry: Eyes, skin
Signs and symptoms
of Exposure: May cause dermatitis on prolonged
contact in
sensitive
individuals
Existing Conditions
Aggravated by Exposure: None known
PERMATEX INDUSTRIAL CORPORATION
07/02/97
ROCKY HILL,
CONNECTICUT 06067
TELEPHONE:
(860) 571-5100
MATERIAL SAFETY
DATA SHEET Page 02 of 05
Product Name: Locks
Studs(TM) High Strength Threadlocker
Item No.: 82174
3.
HAZARDS IDENTIFICATION
(continued)
Literature
Referenced Carcinogen
Ingredients Target Organ and
Other Health Effects NTP IARC OSHA
Polyglycol dimethacrylate ALG
IRR NO NO NO
Bisphenol A fumarate resin ALG
IRR NO NO NO
CUMENE HYDROPEROXIDE ALG CNS
COR IRR MUT NO NO NO
Poly(ethylene) No
Data NO N/A NO
SACCHARIN No
Data YES 2B NO
N,N-Dialkyltoluidines No
Data NO
NO NO
SILICA, AMORPHOUS, FUMED,
CRYSTALLINE-FREE NUI NO N/A NO
-------------------------------------------------------------------------------
Abbreviations
N/A Not Applicable
2B Possibly carcinogenic to
humans
ALG Allergen
CNS Central nervous system
COR Corrosive
IRR Irritant
MUT Mutagen
NUI Nuisance dust
4.
FIRST AID MEASURES
Ingestion: Do not induce vomiting. Keep individual calm.
Obtain medical
attention
Inhalation: Does not apply
Skin Contact: Wash
thoroughly with soap and water
Eye Contact: Flush at least
15 minutes with water. Obtain
medical
attention.
5.
FIRE FIGHTING MEASURES
Flash Point: More than
200°F Method: Tag Closed Cup
Recommended
Extinguishing Agents: Carbon dioxide, foam, dry chemical
Hazardous Products formed
by Fire or Thermal Decomp Irritating
organic vapors
Unusual Fire or
Explosion Hazards:
None
Explosive Limits:
(% by volume in air)Lower Not
available
(% by volume in air)Upper Not
available
PERMATEX INDUSTRIAL CORPORATION
07/02/97
ROCKY HILL,
CONNECTICUT 06067
TELEPHONE:
(860) 571-5100
MATERIAL SAFETY
DATA SHEET Page 03 of 05
Product Name: Locks
Studs(TM) High Strength Threadlocker
Item No.: 82174
6.
ACCIDENTAL RELEASE MEASURES
Steps to be taken in case
of spill or leak: Soak up in an inert absorbent. Store in a partly
filled, closed container until
disposal.
7.
HANDLING AND STORAGE
Safe Storage: Store below
100°F
(Contact Loctite Customer Service
1-800-243-4874 for shelf Life information)
Handling: Avoid
prolonged skin contact. Keep away from eyes.
8.
EXPOSURE CONTROLS, PERSONAL PROTECTION
Eyes: Safety glasses
or goggles.
Skin: Neoprene,
rubber, or butyl rubber gloves.
Ventilation: Does not apply
See Section 2 for Exposure Limits.
9.
PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Red liquid
Odor: Mild
Boiling Point: More than
300°F
pH: Does not apply
Solubility in Water: Slight
Specific Gravity 1.05 at 80°F
Volatile Organic Compound
(EPA Method 24) 13.5%; 141.75 g/l
Vapor Pressure: Less than 5mm
at 80°F
Vapor Density: Not available
Evaporation Rate
(Ether = 1) Not available
10. STABILITY AND REACTIVITY
Stability: Stable
Hazardous Polymerization: Will not occur
Incompatibility: None
Conditions to Avoid: Not available
Hazardous Decomposition
Products (non-thermal): None
11. TOXICOLOGICAL INFORMATION
See Section 3.
PERMATEX INDUSTRIAL CORPORATION
07/02/97
ROCKY HILL,
CONNECTICUT 06067
TELEPHONE:
(860) 571-5100
MATERIAL SAFETY
DATA SHEET Page 04 of 05
Product Name: Locks
Studs(TM) High Strength Threadlocker
Item No.: 82174
12. ECOLOGICAL INFORMATION
No data available
13. DISPOSAL CONSIDERATIONS
Recommended methods of
disposal: Incinerate following EPA and
local regulations.
EPA Hazardous Waste
Number NH - Not a RCRA Hazardous
Waste Material
14. TRANSPORTATION INFORMATION
DOT (49 CFR 172)
Domestic Ground Transport
Proper Shipping Name: Unrestricted
Hazard Class or
Division: Unrestricted
Identification Number: None
Marine Pollutant: None
IATA
Proper Shipping Name: Unrestricted
Class or Division: Unrestricted
UN or ID Number: None
15. REGULATORY INFORMATION
CA Proposition 65: This product
contains Saccharin. No prop65 hazard
warning is
necessary if this product is used as
reasonably
anticipated.
16. OTHER INFORMATION
Estimated NFPA(R) Code:
Health Hazard: 1
Fire Hazard: 1
Reactivity Hazard: 1
Specific Hazard: Does not apply
Estimated HMIS(R) Code:
Health Hazard: 1
Flammability Hazard: 1
Reactivity Hazards: 1
Personal Protection: See Section 8.
NFPA is a registered trademark of the National Fire Protection
Assn.
HMIS is a registered trademark of the National Paint and Coatings
Assn.
Prepared By: Stephen
Repetto
Title: Research
Chemist, Environmental Health & Safety
PERMATEX INDUSTRIAL CORPORATION
07/02/97
ROCKY HILL, CONNECTICUT 06067
TELEPHONE:
(860) 571-5100
MATERIAL SAFETY
DATA SHEET Page 05 of 05
Product Name: Locks
Studs(TM) High Strength Threadlocker
Item No.: 82174
16. OTHER INFORMATION
(continued)
Company: Loctite Corp.,
1001 Tr Br Cr, Rocky Hill CT 06067
(24hr.) Phone: (860) 571-5100
Revision Date: January 22,
1996 Revision: 0028